Meanings of level in the construction industry
In relation to the built environment, the term ‘level’ can have several different meanings.
- It can be used as another term for a building’s storey or floor, i.e. ‘level 3’, or 'finished floor level'.
- It can be a term to refer to degrees of implementation of building information modelling, i.e. ‘BIM level 2’, or the information itself, i.e. ‘level of detail’.
- In surveying, levelling is a process of determining the height of one point (or level) relative to another. It is used in surveying to establish the elevation of a point relative to a datum, or to establish a point at a given elevation relative to a datum. There are several different surveying instruments that can be used, all of which are loosely referred to as ‘levels’, for example, a spirit level. A line level is a level that hangs on a builder’s string line. See also: Spirit level and Plumb level.
- The term is also used in relation to ground preparation and excavation, i.e. ‘level an area’. This means that the ground is made flat and of an even grade. This is important if works are to be carried out on uneven or sloping ground. In this context, the terms ‘level’ and ‘flat’ can be interchangeable, however, in other contexts they should be distinguished from one another. For example, when laying floor tiles; a level surface needs to be parallel to its perfectly horizontal plane, whereas a flat surface is one that does not have significant high or low spots.
- In terms of project management, it be used in the context of ‘resource levelling’ which is a technique whereby the demand for limited resources is accommodated by adjusting the project programme. In construction, this can be used to analyse the large variations in resource usage that can occur over time, and which can be inefficient and costly. For more information, see Resource levelling.
It can also be used to refer to an amount of something, such as; water level, sound level, light level, and so on.
[edit] Related articles on Designing Buildings Wiki
Featured articles and news
Creativity, conservation and craft at Barley Studio. Book review.
The challenge as PFI agreements come to an end
How construction deals with inherit assets built under long-term contracts.
Skills plan for engineering and building services
Comprehensive industry report highlights persistent skills challenges across the sector.
Choosing the right design team for a D&B Contract
An architect explains the nature and needs of working within this common procurement route.
Statement from the Interim Chief Construction Advisor
Thouria Istephan; Architect and inquiry panel member outlines ongoing work, priorities and next steps.
The 2025 draft NPPF in brief with indicative responses
Local verses National and suitable verses sustainable: Consultation open for just over one week.
Increased vigilance on VAT Domestic Reverse Charge
HMRC bearing down with increasing force on construction consultant says.
Call for greater recognition of professional standards
Chartered bodies representing more than 1.5 million individuals have written to the UK Government.
Cutting carbon, cost and risk in estate management
Lessons from Cardiff Met’s “Halve the Half” initiative.
Inspiring the next generation to fulfil an electrified future
Technical Manager at ECA on the importance of engagement between industry and education.
Repairing historic stone and slate roofs
The need for a code of practice and technical advice note.
Environmental compliance; a checklist for 2026
Legislative changes, policy shifts, phased rollouts, and compliance updates to be aware of.



















